|
*Discontinued*, no
replacement available. Must switch to the new
CA12CD-S system
This is the Plantronics CA12CD
System Replacement/Spare PTT remote unit only. comes with
battery. part#
80323-01 (old part#
90224-0) CA12CD
base unit and the remote unit come already paired with each other in the factory
by a process called subscription. If you purchase a new remote unit, or if your remote unit loses
its subscription (this is shown by a rapidly flashing On-Off indicator), you
can perform the subscription process as follows.
CA12CD remote Re-subscription Instructions:
- Hold down both of the talk volume
controls located on the top of the base unit. The base power indicator
should begin blinking.
- Hold the remote unit’s listen
volume control in either the up or down position.
- The remote unit’s On-Off indicator
will turn on (no flashing).
- The remote unit will
subscribe (or re-subscribe) to the base unit, after which the base power
indicator will go from blinking to solid, and the remote unit’s On-Off
indicator will turn off.
- Unplug the AC adapter from the base
unit and then plug it back in.
- Press the remote unit’s On-Off
button to allow the link. You will now be able to use the CA12CD.
Important Note:
This remote is not compatible with the new
Plantronics
CA12CD-S |
01 Plantronics CS50 CS55 Replacement Battery
02 Plantronics U10 Cable for Cisco IP Phone, M12/M22 26716-01
03 Plantronics HL10 Handset Lifter
05 Plantronics In-Use Busy light CS540 CS530 CS510 Savi 700
06 Plantronics Y Training/Supervisor Cord, cable splitter with Mute